Sharp AR-C250 Operation Manual page 149

FINISHER (AR-FN4)
Misfeed removal
MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
7-26
The copier will stop when a misfeed occurs.
The message "MISFEED HAS OCCURRED. CLEAR INDICATED
FOR RECOVERY INSTRUCTIONS." will appear
AREA. PRESS
with a display of paper misfeed locations. Press the INFORMATION
( ) key for more detailed information as necessary.
While holding the finisher release lever, slide the finisher
1
away from the copier.
Remove the misfed paper from the finisher or from the
2
exit area of the copier.
Misfeed in the finisher
When a misfeed occurs in the finisher, turn the roller rotating knob in
the direction of arrow. The misfed paper will be delivered to the offset
tray. If the paper is not delivered to the offset tray, open the paper guide
as shown and remove the paper.