Sharp AR-C250 Operation Manual page 41

JOB PROGRAMS
PRESS PROGRAM NUMBER.
1 2
4 5
7 8
RECALL STORE/DELETE
JOB PROGRAMS
PRESS PROGRAM NUMBER.
JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
OR DELETE?
CANCEL DELETE
RECALL STORE/DELETE
JOB PROGRAMS
PRESS PROGRAM NUMBER.
1 2
4 5
7 8
RECALL STORE/DELETE
8 9
PROGRAM
IT
0
P
JOB PROGRAMS
PRESS PROGRAM NUMBER.
1 2
4 5
7 8
RECALL STORE/DELETE
Deleting a stored job program
Follow steps 1 and 2 in "Storing a job program" on the
1
EXIT
previous page. (1. Press the PROGRAM key. 2. Press
the "STORE/DELETE" key.)
3
Select the storage register number of the program to be
2
6
deleted.
9
Be sure to select a number which contains a stored program. If
not, "Storing a job program" operation will start.
Press the "DELETE" key or the "CANCEL" key.
3
If the "DELETE" key is pressed, the program will be deleted from
memory.
Press the "CANCEL" key to keep the program.
STORE
Press the "EXIT" key to exit the job memory mode.
4
EXIT
3
6
9
Recalling a job program
C
Press the PROGRAM key.
1
The JOB PROGRAMS screen will appear on the touch panel.
CLEAR
The numbers which are highlighted are program numbers which
contain stored programs.
Select a stored program from 1 to 9 on the touch panel.
2
EXIT
All selections stored in the program will appear on the touch
panel.
The recalled settings may be modified for a particular job run, but
3
any changes made will not be stored in the job memory. To store
the new settings, follow the "Storing a job program" procedure.
6
9
JOB MEMORY
2-19