Sharp AR-C250 Operation Manual page 31

Original (2-sided) Copy (2-sided)
Maximum height
line
2-SIDED
COPY
OUTPUT
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
EVEN NUMBER ODD NUMBER
ORIGINALS ORIGINALS
AUTO AUTO 8/ 11 1
2
EXPOSURE PAPER SELECT
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
EVEN NUMBER ODD NUMBER
ORIGINALS ORIGINALS
AUTO AUTO 8/ 11 1
2
EXPOSURE PAPER SELECT
INTE
1 2
3
INTERRUPT
4 5 6
CLE
CLEAR
CA
AL
ALL
7 8 9
C
C
AUDIT PROGRAM
CLEAR
0
P
CL
2-sided copies from 2-sided originals
To copy in the 2-sided to 2-sided mode, an optional duplex module (AR-
DU2) must be installed.
Adjust the original guides to the size of the originals and
1
set the originals face up in the document feeder tray.
Press the 2-SIDED COPY key.
2
AUTO
Press the
3
OK
PRE-COUNT
100%
COPY RATIO
Press the "OK" key.
4
OK
PRE-COUNT
Enter the desired number of copies.
5
100%
COPY RATIO
When making color copies in the duplex mode onto extra size
paper or paper 8-1/2" x 14" or larger, only one copy per original
can be made. Even if a multiple number of copies is set, the
number will be changed to 1 when a START key is pressed.
Press the COLOR COPY START (
6
COPY START (
To perform color copying, press the COLOR COPY START
(
COPY START (
To cancel a copy run during duplex copying, press the CLEAR
ALL (
key on the touch panel.
) key.
) key. To perform black/white copying, press the BLACK
) key.
) key.
CA
USING THE RADF
) key or BLACK
2-9