Table of Contents
Advertisement
USING THE TOUCH PANEL
How to use the touch panel
READY TO COPY.
1.8/ 11
1
2
2.11 17
3.8/ 14
1
2
AUTO
EXPOSURE
PAPER SELECT
RECALL
STORE/DELETE
Selection of function
CANCEL
ERASE
EDGE ERASE
CENTER ERASE
EDGE+CENTER
ERASE
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
ERASE
CENTERING
TRANSPARENCY INSERTS
COLOR
COVERS
ADJUSTMENTS
AUTO
AUTO
8/ 11
1
2
EXPOSURE
PAPER SELECT
1-8
You can set or cancel a function displayed on the touch
panel by pressing (touching) a key with a finger. The touch
key operation can be confirmed with a beep tone (and
PAPER TYPE
16~28 lbs.
highlighting of the touch key).
28+~35 lbs.
35+~75 lbs.
KEY OPERATOR For the beep tone to be heard, the beep tone must be
TRANSPARENCY
enabled by a key operator program. See page 27 of the KEY OPERATOR'S
GUIDE.
100%
COPY RATIO
A grayed out function key represents unavailability of that
function. If a grayed out key is pressed, two short beeps will
sound.
To register the selected settings for a function, press the
OK
"OK" key on the setting screen. The settings indicated by
OK
a highlighted display will be registered as a selected function.
(0~1)
1/2
inch
Some special functions can be selected by pressing the
relevant keys on the SPECIAL MODES screen (page 3-4) or
OK
on the IMAGE EDIT menu (page 3-26) to highlight the keys.
DUAL PAGE
To cancel these functions, press the relevant keys again to
COPY
return the keys to the normal display. These functions are:
Dual page copying, Centering, Transparency inserts, Neg./
IMAGE EDIT
pos. reverse, Mirror image, and 11x17 full-bleed.
100%
COPY RATIO
Advertisement
Table of Contents
