Table of Contents
Advertisement
READY TO COPY
COLOR BALANCE
CANCEL
C
M
N
1
2
3
4
5
6
7
8
9
AUDIT
PROGRAM
0
P
INTERRUPT
3
6
CLEAR
CA
ALL
9
C
PROGRAM
P
CLEAR
The setting screen for COLOR BALANCE will appear.
Use the keys indicated in the illustration above to adjust
5
the color balance settings.
OK
Use these keys to select the color to be adjusted ( C
OK
If only the area around the letter inside a key is highlighted, the
settings have been changed from the factory default settings.
Use these keys to adjust the densities of each of the eight
density levels.
When one of the keys is pressed, the corresponding indicator
line will move up or down one step. Press the
increase the density of the corresponding level, or the
to decrease the density.
Use these keys to change the densities of all eight levels at
once.
When either key is pressed, the indicator lines of all eight levels
will move up or down one step.
Press the
decrease the density.
Use this key to return the densities of all eight levels to the
initial settings.
The initial color balance settings are the values set with key
operator program "Initial Color Balance Setting". For this reason,
INTERRUPT
the initial settings may not necessarily be 0 (the middle indicator
position) for all levels. The initial setting of each level is shown
by a gray indicator. See page 22 of the KEY OPERATOR'S
CLEAR
CA
GUIDE.
ALL
Make all other desired copier selections and enter the
6
C
desired number of copies.
CLEAR
Press the COLOR COPY START (
7
The BLACK COPY START (
copying. However, the COLOR BALANCE settings will be ignored.
You can also store color balance settings for repeated use in the
future. (Refer to "Storing a Job Program" on page 2-18). In this
case, complete the color balance setting before pressing the
PROGRAM key bacause color copy samples cannot be made
after the PROGRAM key is pressed.
COLOR ADJUSTMENTS
READY TO COPY.
SPECIAL MODES
COLOR BALANCE
CANCEL
C
M
Y
Bk
M
= magenta, Y
= yellow, Bk = black).
key to increase the density, or the
OK
OK
= cyan,
key to
key
key to
) key.
) key can be pressed for
3-23
Advertisement
Table of Contents
