Table of Contents
Advertisement
Left guide
Front guide
Changing the copy paper size in the tray
Gently lift and pull out the paper tray until it stops.
1
Push the pressure plate down until it locks in place.
2
Squeeze the lock lever of the front guide and slide the
3
front guide to match the width of the paper.
Move the left guide to the appropriate slot as marked
4
on the tray.
When using 5-1/2" x 8-1/2" copy paper, load it into the uppermost
paper tray. If other trays (including trays in optional paper feed units)
are used, paper misfeeds may occur.
When using 11" x 17" copy paper, store the left guide in the slot at
the left front of the paper tray.
Load copy paper into the tray.
5
Place the appropriate label to indicate the selected
6
paper size into the recess on the right front side of the
paper tray.
Push the paper tray firmly back into the copier.
7
LOADING COPY PAPER
11
Advertisement
Table of Contents
