Two-Sided Copying - Sharp AR-164 Operation Manual

TWO-SIDED COPYING

Two-sided copies can be made on this copier using the bypass tray.
22
Place the first original on the original table and make a
1
copy.
G
The first copy can be made using any of the paper feed stations.
Replace the first original with the second original and
2
close the platen cover.
G
Make sure that the first and second originals are oriented in the same
way on the original table.
G
When the originals are placed horizontally, make sure that the first and
second originals are oriented in the reverse way on the original table.
G
The first and second originals can be set in the document feeder tray.
However they must be set individually.
Turn the first copy over left to right and place it into the
3
bypass tray.
G
Be sure to feed the copies one sheet at a time.
Use the TRAY SELECT key to select the bypass tray.
4
Press the START key.
5