Customising The Beverages; Memorising Your Personal Profile; Cleaning; Cleaning The Machine - DeLonghi ECAM65*.55 series Instructions For Use Manual

To interrupt hot water delivery manually, press the selection
arrow corresponding to " STOP".
2. Wait a few minutes for the hot water/steam spout to cool
down, then extract (fig. 17) by pressing the release button
(C7). Hold the spout with one hand and with the other,
turn the cappuccino maker and pull it downwards (fig. 23).
3. Also remove the steam connection nozzle by pulling it
downwards (fig. 24).
4. Check the hole in the connection nozzle is not blocked. If
necessary, clean using a toothpick.
5. Wash all parts of the spout thoroughly with a sponge and
warm water.
6. Insert the connection nozzle and cappuccino maker on the
spout by pushing them upwards and turning them clock-
wise until they are attached.
13.

CUSTOMISING THE BEVERAGES

The aroma (when required) and quantity of the drinks can be
customised.
1. Make sure the profile (B4) for which you want to customise
the beverage is active. You can select "MY" beverages for
each of the 6 profiles;
2. From the homepage, press the selection arrow (B2) corre-
sponding to " OK" (B6);
3. Select the beverage you want to customise (a directly
selected beverage or from the beverages selection menu
- B3) to enter the customising screen. The corresponding
accessories must be inserted;
4. (Beverages with coffee only) "CHOOSE COFFEE AROMA":
Select the required aroma by pressing the selection arrows
corresponding to "-" or "+" and press the selection arrow
corresponding to "
5. "COFFEE QUANTITY, STOP TO SAVE": Preparation begins and
the appliance displays the quantity customising screen in
the form of a vertical bar. The star alongside the bar repre-
sents the current quantity.
6. When the quantity reaches the minimum quantity you can
set, " STOP" appears on the display (B1).
7. When the required quantity is reached, press " STOP".
8. "SAVE NEW SETTINGS?": Press the selection arrow corre-
sponding to " OK" to save (or the selection arrow corre-
sponding to " ESC" to cancel).
The appliance confirms if the values have been saved or not
(depending on the previous selection). Press the selection arrow
corresponding to " OK".
The appliance goes back to the homepage.
Please note!
Cappuccinos and milk-based coffees: the coffee aroma
•
is saved first, followed by the quantity of first milk, then
coffee;
OK";
• Hot water: the appliance delivers hot water. Press the se-
lection arrow (B2) corresponding to " STOP" to save the
required quantity.
• You can also customise the beverages by connecting with
the DeLonghi Coffee Link App.
• Press " ESC" to exit programming. The values will not
be saved.
14.

MEMORISING YOUR PERSONAL PROFILE

The appliance allows you to memorise 6 different profiles, each
associated with a different icon.
The customised "MY" beverages "AROMA" and "QUANTITY"
values are saved in each profile (see section "13. Customising
the beverages "). The order in which all the beverages are
displayed is based on the frequency of selection.
To select or enter a profile, press on the profile currently in
use (B4), press the selection arrow (B2) corresponding to the
"NEXT>" symbol until the required profile is displayed, then
press on the profile.
Please note!
• " GST" (GUEST) profile: select this profile to deliver bev-
erages with the default settings. The
active.
• You can rename your personal profile by connecting with
the DeLonghi Coffee Link App (only the first three charac-
ters will be displayed).
To customise the profile icon, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "CUSTOMISE PRO-
FILE" appears on the display;
3. Press the selection arrow corresponding to "CUSTOMISE
PROFILE";
4. Press the selection arrow corresponding to the icon you
want to select (press the selection arrow corresponding to
"NEXT>" to display all the icons available);
5. Press the selection
" ESC" twice to go back to the homepage.

15. CLEANING

15.1

Cleaning the machine

The following parts of the machine must be cleaned regularly:
- the appliance's internal circuit;
- coffee grounds container (A10);
- drip tray (A14) and drip tray grille (A13);
- water tank (A16);
18
function is not
arrow corresponding
"
to