Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Shark V1911TR
Summary of Contents for Shark V1911TR
- Page 1 COPYRIGHT© EURO-PRO OPERATING LLC 2006 2 Speed Cordless Sweeper Models: V1911, V1911TR 7.2 Volt DC U.S : EURO-PRO Operating LLC Canada : EURO-PRO Operating LLC 94 Main Mill Street, Door 16 Plattsburgh, NY 12901 1 (800) 798-7398 www.sharkvac.com 4400 Bois Franc...
-
Page 3: Important Safeguards
RETURN TO: EURO-PRO Operating LLC, 4400 Bois Franc, St Laurent, Qc, H4S 1A7 V1911 - V1911TR _______________________________________________________________________ Appliance model... -
Page 4: Troubleshooting
PARTS AND COMPONENTS Handle Telescopic Tube Dust Cup Empty Button Lower Handle Extension Tube Steering Pivot Charging Light Indicator On/Off Switch Charging Jack Charging Adapter: Only Use KA12D090020024U 10. Transparent Brush Cover 11. Rotating Brush 12. Edging Tool 13. Gear Box 14. -
Page 5: Care And Maintenance
OPERATING INSTRUCTIONS Slip the belt over the brush bar cap. Insert the brush bar into the slot. (Fig. 13) 10. Insert the gear box tabs into the tab slots and push down until it clicks into place. 11. To replace the squeegee, follow instructions above for removing the gear box and slide the squeegee out from left to right. -
Page 6: Charging Instructions
OPERATING INSTRUCTIONS 4. The telescopic tube is designed to adjust to the height that is comfortable for all users. To adjust the height, simply push down the release button on the telescopic tube and pull the handle to adjust to a comfortable height for using. (Fig. 2) Release Button Fig. -
Page 7: Battery Removal & Disposal
OPERATING INSTRUCTIONS Cleaning the Dust Cup Container To achieve the best performance, empty the dust cup container after each use. Press the dust cup release lever with your foot. (Fig. 9) Note : Be careful not to accidentally turn the unit “On” Fig. - Page 8 OPERATING INSTRUCTIONS Removal of Battery Pack Press the dust cup release lever with your foot and remove it from the sweeper power head. Turn unit over so that the base is facing upwards. Be careful not to turn the unit Push in locking tab and lift off battery compartment cover.