Image Snap - Imgsnp; Imgsnp Modifiers - Honeywell Vuquest 3330 User Manual

The modifiers for each of these commands follow the command description.
Note: The images included with each command description are examples only. The results
you achieve may be different from those included in this manual. The quality of the
output you receive will vary depending on lighting, quality of the initial image/object
being captured, and distance of the scanner from the image/object. To achieve a
high quality image, it is recommended that you position your scanner 4-6" (10.2-15.2
cm) away from the image/object you are capturing.
Step 1 - Take a Picture Using IMGSNP

Image Snap - IMGSNP

An image is taken whenever the hardware button is pushed, or when the Image
Snap (IMGSNP) command is processed.
The image snap command has many different modifiers that can be used to
change the look of the image in memory. Any number of modifiers may be
appended to the IMGSNP command. For example, you can use the following com-
mand to snap an image, increase the gain, and have the beeper sound once the
snap is complete: IMGSNP2G1B

IMGSNP Modifiers

P - Imaging Style
This sets the Image Snap style.
•
•
•
B - Beeper
Causes a beep to sound after an image is snapped.
•
•
T - Wait for Trigger
Waits for a hardware button push before taking the image. This is only available
when using Photo Style (1P).
•
148
0PDecoding Style. This processing allows a few frames to be taken until the
exposure parameters are met. The last frame is then available for further use.
1PPhoto Style (default). This mimics a simple digital camera, and results in a
visually optimized image.
2PManual Style. This is an advanced style that should only be used by an
experienced user. It allows you the most freedom to set up the scanner, and has
no auto-exposure.
0BNo beep (default)
1BSounds a beep when the image is captured.
0TTakes image immediately (default)
Vuquest 3320g User Guide