Table of Contents
Advertisement
the number of QR Code bar codes determined by information encoded in those bar
codes. Once the proper number of codes is reached, the data is output in the order
specified in the bar codes. Default = On.
* On
QR Code Page
QR Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
page 209), and scan the value and the Save bar code from the on the inside the
back cover of this manual. The data characters should then appear properly.
134
QR Code Page
Vuquest 3320g User Guide
Off
Symbology Charts
on
Advertisement
Table of Contents
Troubleshooting
