Setting The Receiving Frequency Via The Channel Number - Sennheiser EM 3532-U Instructions For Use Manual

14

Setting the receiving frequency via the channel number

In the "CHANNEL" menu, you can directly change from one stored receiving frequency to the next.
Press the /
"CHANNEL" display on the display panel
The display indicates the receiving frequency in alternation with the channel number.
With the /
forwards or backwards to the next channel. The next channel is not necessarily identical
with the next channel number assigned!
The display indicates the new channel in alternation with the receiving frequency assigned.
Note
If you have reached the first or the last frequency memory, the display briefly indicates
"EndtAb". Continue with your selection in the opposite direction.
Have you selected the desired channel? Press the
the display. The display then switches back to the standard display.
Only now does the receiver change to the new frequency / channel.
buttons to select the "CHANNEL" menu. Then press the
buttons you can now select a different channel. The display jumps either
begins to flash:
SET button until "Sto" briefly appears on
SET button. The
55