Basic Functions Of The Sennheiser Operating Menu - Sennheiser EM 3532-U Instructions For Use Manual

9

Basic functions of the Sennheiser operating menu

A special feature of the Sennheiser 3000 series is the similar operation of transmitters and receivers.
In stressfull situations, for example on stage or during a live show or presentation, it is important
that the receiver is easy to operate and that adjustments to the receiver settings can be made
quickly and "without looking". Therefore, the necessary operating steps for each device must be
similar.
Press the
By briefly pressing the
next menu. Your selection is indicated by the corresponding LC dot on the right of the
display panel
Press the SET
If you now press the
flash, indicating that you are in the setting mode of the selected menu.
Press the
Press the SET
To store a setting, press the SET button until "Sto" briefly appears on the display, indicating
that your setting has been stored. The display then switches back to the standard display.
Important: Only now is your setting stored!
If you do not press the
setting mode is automatically left and the display switches back to the standard display.
You can discontinue your preselection by briefly (!) pressing the
briefly indicates "ESC" and then switches back to the standard display.
/ buttons to select a menu:
/ buttons, you can jump either forwards or backwards to the
.
button to get into the setting mode:
SET button, the corresponding display on the display panel begins to
/ buttons to adjust the settings of the selected menu.
button to store the setting:
/ buttons or the SET button for more than 30 seconds, the
SET button. The display
49