Setting A Receiving Frequency, Allocating A Frequency Memory And Assigning A Channel Number - Sennheiser EM 3532-U Instructions For Use Manual

12 Setting a receiving frequency, allocating a frequency memory and
assigning a channel number
The EM 3532 receiver has a switchable frequency memory to store a maximum of 32 receiving
frequencies with their respective channel numbers. The storing procedure is similar for each entry or
modification:
Press the /
"FREQUENCY
With the /
The display jumps to the next frequency in 5-kHz steps:
When you get to the desired frequency, press the
the display.
You now have to check whether the frequency memory (nos. 1 to 32) is allocated correctly.
The display indicates the receiving channel with the allocated frequency memory, and the
"CHANNEL" display lights up. The display for the frequency memory begins to flash.
52
buttons to select the "FREQUENCY" menu. Then press the
MHZ" display on the display panel
buttons you can now select a different frequency.
begins to flash:
SET button until "Sto" briefly appears on
SET button. The