Easy Setup Sync/Sync Function - Sennheiser evolution wireless ew 300 IEM G3 Instruction Manual

Setting Transferred parameters
"Balance" Current balance setting
("−15"/"+15")
"Squelch" Current squelch setting
("Off", "5
"Mode" Current audio mode setting
("Stereo"/"Focus")
"High boost" Current treble boost setting
("flat"/"High
"Auto Lock" Current lock mode setting
("active"/"inactive")
"Limiter" Current limiter setting
("−18 dB",
When carrying out the
and channel setting is automatically transferred to the receiver via the infra-red
interface.
Carrying out an Easy Setup Sync or a Sync function
The following assumes that you are using the
channel system. You can also you the
sion link between one transmitter and one receiver.
Easy Setup Sync
Switch your rack-mount transmitters
and your diversity receiver on.
On all transmitters, call up the
Setup" menu item.
The text "Easy Setup Sync" and the
icon appear on the display panels of the
transmitters.
The RF signal of the transmitters is auto-
matically deactivated.
Use your EK 300 IEM G3 diversity receiver
to perform a frequency preset scan and
select a frequency bank with a sufficient
number of unused channels (see the
instruction manual of the receiver).
dB" ... "25 dB")
boost")
"−12 dB", "−6 dB", "Off")
Sync function, the transmitter's current frequency bank
Easy Setup Sync
Easy Setup Sync
Sync
Switch your rack-mount transmitter
and your diversity receiver on.
"Easy Press the
mitter.
The
panels of the transmitter.
–
Using the transmitter
function for setting up a multi-
function for establishing a transmis-
button on the trans-
icon appears on the display
15