Setup - Heath Zenith notifi alert Owner's Manual

Setup

1
Install the Notifi Alert Chime
1. Plug in the chime at the desired location. NOTE: It is recommended that the chime be plugged into the bottom wall
receptacle with the chime hanging below the receptacle as shown.
2
Remove the Notifi Alert Push Button Battery Tab
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
1. Remove the backplate of the Notifi Alert push button by pushing in tab on the bottom with a small flathead screwdriver (not
included).
2. Remove the orange battery tab.
4