Install fixed arms (800 EFX only):
1.
Install the console. For instructions, refer to the console guide included in the
console box.
2.
Install two screws
into the upper display (Figure 18).
3.
Insert the shaft of the arm to the center mount using two set screws
Partially tighten mounting fasteners.
4.
Rotate arm assembly up and attach clamp using two flathead screws
5.
Tighten the
fasteners to 100 in-lb (11.29 N-m) of torque and the
fasteners to 20 in-lb (2.25 N-m).
Figure 18
.
.
13