Controls & Components - Grizzly G0765 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 2–6 and the following descrip-
tions to become familiar with the basic controls of
this lathe.
Control Panel
A
F
E
Figure 2. Control panel.
A. On/Off Switch w/Emergency Stop Button:
When pressed, cuts power to motor and
control panel. To reset, press in side tab, lift
switch cover, and press On button.
B. Spindle Speed RPM Display: Shows a digi-
tal readout of the spindle speed.
C. Power Light: Illuminates when machine is
connected to power source, Emergency Stop
Button is reset, and On button is pressed.
D. Spindle Switch: Starts, stops, and reverses
spindle rotation.
E. Fuse: Protects control panel in case of an
electrical overload.
F. Variable Speed Dial: Controls the variable
speed of the spindle.
-4-
manual BEFORE
B
C
D
Carriage
G
L
K
Figure 3. Carriage controls.
G. 4-Way Tool Post: Holds up to four cutting
tools at once that can be individually indexed
to the workpiece.
H. Compound Rest Handwheel: Moves the
tool toward and away from the workpiece at
the preset angle of the compound rest.
I. Thread Dial: Indicates when to engage the
half nut during threading operations.
J. Half Nut Lever: Engages/disengages half
nut for power feed and threading operations.
K. Cross Slide Handwheel: Moves the cross
slide toward and away from the workpiece.
L. Carriage Handwheel: Moves the carriage
along the bedway.
Model G0765 (Mfd. Since 5/15)
H
I
J