Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–3 and the following descrip-
tions to become familiar with the basic controls of
this machine.
A
B
Figure 2. Control panel.
A.
ON
Button: Starts the spindle rotation.
B.
EMERGENCY STOP
spindle rotation OFF.
C. Variable Speed Dial: Adjusts the spindle
speed from low to high within the range gov-
erned by the pulley belt position.
D. FWD/REV Switch: Toggles the spindle
direction between clockwise and counter-
clockwise.
E. RPM Digital Readout: Indicates the spindle
speed in RPM (revelations per minute).
-4-
manual
BEFORE
C
E
D
Button: Turns the
I
Figure 3. Tailstock lock lever.
F.
Tailstock Base Lock: Secures tailstock in
position along bed.
G.
Tailstock Handwheel: Moves quill toward
and away from spindle.
H.
Quill Lock: Secures quill in position.
I.
Quill: Holds centers or tooling. Can be
moved toward and away from spindle.
Figure 4. Location tool rest levers.
J.
Tool Rest Base (Banjo) Lock Lever:
Secures tool rest base (banjo) in position
along bed.
K.
Tool Rest Lock
Handle:
position.
L. Tool Rest:
Provides stable platform for cut-
ting tools.
Model G0694 (Mfd. Since 03/15)
H
G
F
L
K
J
Secures tool rest in
Advertisement
Table of Contents
