Transporting the conference system
l
k
j
h
a
c
e
70
Transporting the conference system
One of the advantages of the WiCOS wireless conference system is that it
is easy to set up and dismantle again. This makes the conference system
mobile and ensures flexibility of use.
Preparing the access point for transport
Switch the access point off (see page 29).
Unplug the DC power supply from the wall socket.
If necessary, disconnect any cables connected to the access point.
Remove the 3 antennas
carefully pulling the antennas out of the antenna sockets e.
a
Pack the individual components of the access point up safely. Make
sure that the components are protected against shocks and humidity.
a
by unscrewing the coupling rings
c
and