Eavesdropping Protection And Encryption - "Encryption - Sennheiser WiCOS Instruction Manual

Updating the firmware of the access point and the conference units –
"Update"
CAUTION! Danger of damage to the access point and the conference
units!
Improper modification of the firmware (e.g. due to updates)
can cause irreparable damage to the access point and the
conference units.
Only update the firmware if the function of your
conference system is impaired or if the update is
recommended by Sennheiser.
Make sure that you use the correct update file.
Follow the instructions given in the service information.
While the update is in process, do not disconnect the
access point and the conference units form the power
supply.
For information on firmware updates for your WiCOS conference system,
contact your Sennheiser partner or visit the download area of our website
at www.sennheiser.com. There you will also find detailed service
information on how to update the firmware.
Eavesdropping protection and encryption – "Encryption"
All radio signals in the conference system are automatically encrypted via
a 128-bit algorithm. This function prevents that the signals can be
eavesdropped upon.
There a two ways to use encryption:
• automatic encryption via default encryption
• custom encryption for using the conference system in encryption-
protected operation and adapting it to your requirements
In the main navigation, click "Encryption".
The "Key assignment" overview screen appears.
Configuring the conference system
("Use default key")
67