LG SolarDOM Owner's Manual page 44

Rotisserie
Installation & Cooking
Insert the shaft of right
plate into the shaft of
motor.
To Clean ROTISSERIE &
METAL TRAY
Press START/Q-START.
When cooking is completed,
separate the ROTISSERIE from
After cooking, hold the rotisserie bar of both side with the handle and lift up
the food. Take care when
the left end lightly and pull out from the right end.
handling ROTISSERIE, metal
tray and food stuff as it is very
NOTE:
hot. During cooking it is normal
1. The rotisserie cooking is convenient for grilling of meat and poultry.
for the ROTISSERIE & metal
tray to be stained from the
2. The rotisserie cooking can be used in Grill mode, Convection mode and
food. Simply clean the
ROTISSERIE & metal tray with a
3. The rotisserie bar is used for rotisserie cooking only. After rotisserie cooking is
warm soapy water and a soft
cloth. If the ROTISSERIE &
metal tray remain stained after
CAUTION
washing, soak utensils in hot
1. DO NOT USE THE ROTISSERIE WITH NO LOAD, IT WILL DAMAGE THE OVEN.
soapy water for a few minutes.
2. AFTER COOKING, THE METAL TRAY WILL BECOME EXTREMELY HOT.
Do not use metal scouring
3. It is recommended to remove the grease from the turntable every time before
pads. They will scratch the
surface .
All the surface of the food will become even brown without overturning.
Gourmet delight mode.
finished remove the rotisserie bar and store with other accessories.
cooking. Hot grease on the turntable may cause smoke.
Put the shaft of left plate on the
holder of rotisserie.
The shaft of motor
44
The holder of Rotisserie
Metal Tray
HANDLE