Turning On The Device; Attaching The Sensor To A Club - Garmin TRUSWING Owner's Manual

2
Plug the small end of the USB cable into
the USB port on the device.
3
Plug the large end of the USB cable into
the USB port on your computer.
4
Charge the device completely.
The red LED flashes when charging. When
charging is complete, the red LED remains
on.
Turning On the Device
Hold the device key
CD
for one second.
Turning Off the Device
Hold the device key for approximately two
seconds.
Attaching the Sensor to a Club
1
Position the sensor on the shaft of your
club below the grip.
--
----- -
Quick Start Manual
3