Garmin VECTOR 3 Owner's Manual
  1. Manuals
  2. Brands
  3. Garmin Manuals
  4. Measuring Instruments
  5. VECTOR 3
  6. Owner's manual

Garmin VECTOR 3 Owner's Manual

Pedal-based power meter
Hide thumbs
Table of Contents

Advertisement

Quick Links

VECTOR™ 3 AND VECTOR 3S
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Garmin VECTOR 3

Summary of Contents for Garmin VECTOR 3

  • Page 1 VECTOR™ 3 AND VECTOR 3S Owner’s Manual...
  • Page 2 © 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.

  • Page 3: Table Of Contents

    Vector Data ..............3 Pairing Vector with the Garmin Connect Mobile App ....3 Sending Your Ride to Garmin Connect ........3 Customizing the Settings in the Garmin Connect Mobile App ..3 Device Information............4 Vector Device Care ..............4 Maintenance Tips ...............

  • Page 5: Introduction

    NOTE: For more information, go to www.garmin.com/manuals /vector3 or www.support.garmin.com. Thank You Thank you for your Vector 3 or Vector 3S purchase. This manual covers both Vector systems. NOTE: Garmin recommends torque of 25 lbf-ft. (34 N-m). ® Vector was designed for cyclists, by cyclists, to provide an Repeat steps 2 through 5 to install the left pedal.

  • Page 6: About The Vector 3S System

    1030 devices. If you have another compatible device, see Tighten the cleat firmly to the shoe. your owner's manual. NOTE: Garmin recommends torque of 4 to 6 lbf-ft. (5 to 8 N- Hold a data field to change it. Select a category.

  • Page 7: Vector Data

    Garmin Connect Mobile app. • If this is the first device you have paired with the Garmin • From the settings menu in the Garmin Connect Mobile app, Connect Mobile app, follow the on-screen instructions.

  • Page 8: Device Information

    NOTICE Garmin recommends overhauling one pedal at a time taking care to keep track of the small screws and seals. You must obtain a 4 mm hex key, PH 00 screwdriver, 15 mm pedal wrench, 12 mm socket wrench with a in.
  • Page 9 While securely holding the wrench flats with a pedal wrench, use the 12 mm socket wrench to tighten the nut. WARNING Garmin recommends torque of 7 lbf-ft. (10 N-m). Failure to properly tighten the nut could cause the pedal to fall off during a ride, which could result in property damage or serious bodily injury or death.

  • Page 10: Vector Storage

    Power Sensor, and enter the sensor ID found on the Select Sensor Details > Crank Length. pedal. Enter the crank length, and select • From the Garmin Connect Mobile app device settings, enable the Right Pedal, and enter the sensor ID found on the pedal. Other Compatible Devices...

  • Page 11: Power Data Fields

    Power Data Fields Power - Last Lap: The average power output for the last completed lap. NOTE: This list contains power data fields for the Edge 1030 Power - Max.: The top power output for the current activity. device. If you have another compatible device, see your device owner's manual.

  • Page 12: Troubleshooting

    NOTE: The left pedal receives the software update. The left pedal sends the update to the right pedal. Send your ride data to your Garmin Connect account. Garmin Connect automatically looks for software updates and sends them to your Edge device.

  • Page 13: Index

    7 Edge 2, 6 fēnix 6 Forerunner 6 Garmin Connect 3 history 3 sending to computer 3 installing 1 maintenance 4 memory 3 pairing 1, 2, 6 smartphone 3 pedals 1, 2, 4 platform center offset 3 power 2 power (force), meters 2...
  • Page 14 December 2017 190-02235-00_0B...

This manual is also suitable for:

Vector 3s

Table of Contents