Important Notes; Safety; Manufacturer's Notes; Energy Saving - Fujitsu Siemens Computers SCENIC eD Operating Manual

Table of Contents

Advertisement

Important notes

In this chapter you will find information regarding safety which it is essential to take note of when
working with your PC. The manufacturer's notes contain helpful information on your PC.

Safety

This device complies with the relevant safety regulations for data processing equipment. If you have
any questions, contact your sales outlet or our customer service center.
The safety information is contained in the manual "Safety, Guarantee and Ergonomics".
!
The following outlines some of the most important safety information:
During installation and before operating the device, please observe the instructions on
environmental conditions in the chapter entitled "Technical data" as well as the
instructions in the chapter "Preparation for use and operation".
Please check whether the device is set to the local power supply (see chapter
"Preparation for use and operation").
The On/Off switch does not separate the system unit completely from the line voltage. To
disconnect the line voltage completely, remove the power plug from the grounded power
outlet.
Replace the lithium battery on the system board in accordance with the instructions in the
chapter "System expansions - Replacing lithium battery".
Caution: components on the system board can get very hot.

Manufacturer's notes

Keep this Operating Manual together with your device. If you pass on the device to third parties, you
should include this manual.

Energy saving

When the PC is delivered, some energy-saving functions are already set (see the Technical Manual
for the system board or the manual "BIOS Setup").
If you are not using your PC, switch it off.
In the BIOS Setup you may set further energy-saving functions for the PC (see the Technical
Manual of the system board or in the manual "BIOS Setup").
Energy saving under Windows NT
If the attached monitor and screen controller support power management in accordance with VESA
(DPMS), the screen saver Powersaver can be used to switch the monitor into power management
mode.
Energy saving under Windows 9x
Using the DeskLock program you can lock the mouse and keyboard so that no input can be made. If
the attached monitor supports power management in accordance with VESA (DPMS), it can be
switched into power-saving mode at the same time.
A26361-K622-Z100-1-7619
3

Advertisement

Table of Contents
loading

Table of Contents