Table of Contents
Advertisement
3
BASIC OPERATION
PLAY
@
P:LIJ:[
REW
FF
STOP
00
RESET
17
MEMORY
EJECT
Auto power on
The power is automatically
switched on as a cassette is
inserted while the VCR is in the
stand-by mode.
Auto play
The VCR will play back a tape
automatically when a video
cassette is inserted whose
*erasure-prevention tab has been
removed.
Auto eject
When a video cassette without an
*erasure-prevention tab is played
to the end of the tape, the tape
will be automatically rewound
and then the cassette will be
ejected.
Stand-by
mode eject
The video cassette will be ejected
when the EJECTbutton is
pressed, even when the VCR is in
stand-by mode.
13
PLAYBACK
n
Turn on the TV, then set it to the preset
—
video channel or AV mode (if using the
"AV connection").
1
lns.erta recorcled videocassette.
-
Cassette
loading
Gently push the centre of the cassette
until it is loaded automatically.
*Erasure-prevention
tab
z
Press the PLAY button
stop
Press the STOP button.
Eject the cassette
Press the EJECT button on the VCR.
Rewind
Press the REW button during stop or reverse
search operation.
Fast-forward
Press the FF button during stop or forward
search operation.
Variable playback modes
Forward search
Press the FF button during playback or
fast-forward operation.
Reverse search
Press the REW button during playback or
rewind operation.
Still picture
Press the PAUSE/STILL
button during normal
playback.
Frame advance
Press the PAUSERTILL
button during still
picture.
Note:
If still picture is continued for about five
minutes, the VCR will automatically
change to
stop mode in order to prevent the tape from
being damaged.
Playback of an NTSC tape
This VCR can playback an NTSC tape on a
PAL (BIG) or NTSC 4.43 system TV.
For NTSC playback system setting, refer to
"Function
setup" on page 11.
NTSC
When you playback an NTSC tape on a PAL
TV,
If the
image
is unstable,
rolling
vertically,
use
the
TV vertical hold button to stabilize
the image.
The
image
may
shrink
vertically
and
a
black band may appear at the top and
bottom of the screen.
Notes about NTSC tape
An NTSC tape cannot be copied normally.
Picture quality of NTSC tapes cannot be
guaranteed
with this VCR.
When an NTSC Hi-Fi tape is played back,
the monaural sound only will be heard.
Counter memorv
This convenient feature for finding the
beginning of a specific recording etc., is made
possible by the 'rLinear Time counter" that
indicates the tape run time in hours, minutes
and seconds.
1
Press the RESETthen
the MEMORY
button before starting recording or
playback.
The zero point of the counter is now
memorized and the memory indicator
"~"
will illuminate.
z
Press the REWbutton
atthe end of the
recording or playback, the tape will be
rewound and stop automatically
at the
memorized position.
Notes:
Whenever you load a cassette tape, the
counter is reset to "0:00:00.
If you play back a blank tape or a blank
portion of tape, the counter will not operate.
Advertisement
Table of Contents
