26
en | Recommended configuration
5.3
Using full-range systems as monitors
LINE and MIC input level control is available for both INPUT 1 and INPUT 2. The 12 o'clock
position is unity gain (no gain or attenuation) and the range to the right of zero (0) is for
adjusting microphone levels.
Notice!
The direction of the arrow indicates the signal path.
Mode:
Location:
Sub:
Tab. 5.4: DSP settings loudspeakers as monitors
See also
–
–
2018.04 | 01 | F.01U.349.854
ZLX
Floor monitor, page 13
Amplifier DSP, page 15
Live
Monitor
Off
Installation manual
ZLX Powered Loudspeaker Series
ZLX
Electro-Voice