General Safety Instructions - Samson 43 Series Mounting And Operating Instructions

General safety instructions

1 General safety instructions
The device must be mounted, started up or serviced by fully trained and
–
qualified personnel only; the accepted industry codes and practices are to
be observed. Make sure employees or third persons are not exposed to any
danger.
All safety instructions and warnings given in these mounting and operating
–
instructions, particularly those concerning installation, start-up and mainte-
nance, must be strictly observed.
According to these mounting and operating instructions, trained personnel
–
refers to individuals who are able to judge the work they are assigned to
and recognize possible dangers due to their specialized training, their
knowledge and experience as well as their knowledge of the applicable
standards.
The devices comply with the requirements of the European Pressure Equip-
–
ment Directive 2014/68/EU. Devices with a CE marking have a declaration
of conformity, which includes information about the applied conformity as-
sessment procedure. This declaration of conformity can be provided on re-
quest.
To ensure appropriate use, only use the device in applications where the op-
–
erating pressure and temperatures do not exceed the specifications used for
sizing the device at the ordering stage.
The manufacturer does not assume any responsibility for damage caused by
–
external forces or any other external factors.
Any hazards that could be caused in the temperature regulator by the pro-
–
cess medium, operating pressure or by moving parts are to be prevented by
taking appropriate precautions.
Proper transport, storage, installation, operation and maintenance are as-
–
sumed.
Testing according to DIN EN
The Type 43-5, Type 43-6 and Type 43-7 Temperature Regulators are
tested by the German Technical Inspectorate (TÜV) according to
DIN EN 14597. The register number is available on request.
4 EB 2172 EN