Metric Operation - York Eco 2 Quick Start Up Manual

FORM 100.50-SU3 (1207)
Programming
"DIRTY FILTER SWITCH INSTALLED" – Must be
turned ON using Parameter 51 under the PROGRAM
key on the Simplicity control board or under the
EQUIPMENT INSTALLATION tab in the Simplicity
PC software.

METRIC OPERATION

Field Wiring
No additional connections.
Misc. Connections
No additional connections.
Programming
"METRIC OPERATION" – Must be turned ON
using Parameter 57 under the PROGRAM key on the
Simplicity control board.
26
JOHNSON CONTROLS