Sharp GX30 User Manual page 99

Setting the Tone and Strength
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 96.
Press a or b to highlight the file name you wish
2.
to edit, then press A [Options].
The Options menu is displayed.
Press a or b to highlight "Set Tone" or "Set
3.
Strength", then press
For full details, see pages 115 to 117.
Note
• If "Set Tone" and "Set Strength" are not displayed
in the menu in step 2, you cannot change these
settings.
Sending Messages
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 96.
Press a or b to highlight the file name you wish
2.
to send, then press A [Options].
The Options menu is displayed.
Press a or b to highlight "Send Message", then
3.
or A [Select] to select.
press
If you select your original ringtone in step 2, perform
the following, otherwise go to step 5.
98 My Stuff
or A [Select] to select.
Press a or b to highlight the file format "SMAF",
4.
"MIDI" or "i Melody", then press
5.
Enter your message.
For details on creating a message, see "Creating a
New MMS" on page 62.
Note
• Sounds with a red icon cannot be sent attached to a
message.
• Only the first part of the data is converted if you
select "i Melody" in step 4.
Deleting Sounds
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 96.
Press a or b to highlight the file name you wish
2.
to delete, then press A [Options].
The Options menu is displayed.
Press a or b to highlight "Delete", then press
3.
or A [Select] to select.
Press a or b to highlight "One Sound" or "All
4.
Sounds", then press
press A [Yes].
5.
To cancel deletion, press C [No] in step 5.
to select.
to select.