Sharp GX30 User Manual page 66

Turning the Slide Show Setting On or Off
Press A during stand-by.
1.
Press a or b to highlight "Multimedia", then
2.
press to select.
Press a or b to highlight "Settings", then press
3.
to select.
Press a or b to highlight "Slide Show", then press
4.
to select.
Press a or b to highlight "On" or "Off", then
5.
press to select.
If You Select "On"
• You can create messages which have up to 10 slides.
Each slide can contain one picture, one sound file
and up to 1000 characters of text (up to the message
total 100 Kbytes limit).
• If you wish to add a slide to a single slide:
1. Press A [Options] to display the Options menu.
2. Press a or b to highlight "Add Slide", then
or A [Select] to select.
press
If you wish to add a slide to multiple slides:
1. Press A [Options] to display the Options menu.
2. Press a or b to highlight "Slide Control", then
or A [Select] to select.
press
The slide control options available are:
Add: To add a new slide.
Remove: To remove the active slide.
Previous: To navigate to the previous slide.
Next: To navigate to the next slide.
• EVA (e-Animation file) and video clip data cannot be
attached as slide data to the message.
If You Select "Off"
• You can attach a maximum of 20 pictures, sounds or
video clips and up to 100 Kbytes in total.
Inserting Attached Data
You can send pictures, sounds and video clips saved in
Saved Pictures, Saved Sounds or Saved Video Clips
attached to multimedia messages. When attaching
video clips, "Slide Show" must be set to "Off".
Press A during stand-by.
1.
Press a or b to highlight "Multimedia", then
2.
press to select.
Press a or b to highlight "Create Message", then
3.
press to select.
Press A [Options] to display the Options menu.
4.
Press a or b to highlight "Picture", "Sound" or
5.
"Video Clip", then press
Press a or b to highlight the file name you wish
6.
to attach, then press
or A [Select] to select.
to select.
Messages 65