Sharp GX30 User Manual page 94

Downloading Picture File
1.
Perform steps 1 to 3 in "Viewing Pictures" on
page 89.
Press a or b to highlight "Download More", then
2.
press to select.
The picture file download site is displayed.
Changing the File Name
1.
Perform steps 1 to 4 in "Viewing Pictures" on
page 89.
Press a or b to highlight the file name you wish
2.
to change, then press A [Options].
The Options menu is displayed.
Press a or b to highlight "Rename", then press
3.
or A [Select] to select.
4.
Enter a new file name.
To correct the last character, press C [Clear]
briefly.
Press and hold C [Clear] to clear all characters.
5.
Press .
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, >, | and . (full-stop).
(M 6-2-2) Adjusting the Size of the Picture
The pictures that are registered in Saved Pictures can be
adjusted for use as main or external displays as well as
incoming call, alarm or power on/off displays.
When the picture size is modified, the data size is
updated.
1.
Perform steps 1 to 4 in "Viewing Pictures" on
page 89.
Press a or b to highlight the file name you wish
2.
to adjust, then press A [Options].
The Options menu is displayed.
Press a or b to highlight "Adjust Size", then press
3.
or A [Select] to select.
Press a or b to highlight "Main Display",
4.
"External Display", "Power On/Off", "Incoming"
or "Alarm", then press
The selected picture is displayed.
Press a, b, c or d to specify the area you wish
5.
to display, then press
6.
Press to save.
To cancel registration, press C [Back] in step 6.
Note
• "Adjust Size" may not be available depending on the
original picture and copyright issued.
to select.
.
My Stuff 93