Sharp GX30 User Manual page 52

Note
• When "Picture Size" is set to "Small", you can use
the zoom function in three magnifications (×1, ×2,
×4).
• When "Picture Size" is set to "Medium", you can use
the zoom function in two magnifications (×1, ×2).
• When "Picture Size" is set to "Maximum (XXL)",
"Large (XL)" or "Medium", you cannot use the
zoom function.
Selecting the Picture Size
In digital camera mode, press A [Options].
1.
The Options menu is displayed.
Press a or b to highlight "Picture Size", then
2.
or A [Select] to select.
press
Press a or b to highlight the picture size, then
3.
press to select.
Selecting the Picture Quality
In digital camera mode, press A [Options].
1.
The Options menu is displayed.
Press a or b to highlight "Picture Quality", then
2.
or A [Select] to select.
press
Press a or b to highlight "Normal" or "Fine",
3.
then press to select.
Retaking Pictures
After steps 1 to 4 in "Taking Pictures" on page 50, press
C [Cancel].
Further shooting is available.
Note
• The digital camera uses a CCD sensor. Although this
camera has been manufactured to the highest
specifications, some pictures may still appear too
bright or too dark.
• If the phone has been left in a warm place for a long
time before taking or registering a picture, the
picture quality may be poor.
In the Case of No Available Memory
When the number of pictures that can be taken becomes
3 or less, the remaining shots indicator in the upper left
of the screen turns red. (The number of pictures that can
be taken is approximate.)
When the number of pictures that can be taken becomes
0, and when you try to take a picture again, "Memory
full. You cannot take a picture!" is displayed.
Camera 51