Controls; P-106 Control Adjustments - Raypak 106 User's Installation And Operation Manual

5. CONTROLS

5.1. P-106 Control Adjustments

The P-106 has an analog control system. The pool or spa
water temperature is controlled by the thermostat on
the upper front panel of the heater. The control center
contains an On/Off toggle switch and a thermostat. The
switch functions as a means for turning the heater On or
Off.
The thermostat is fitted with a means of limiting the upper
temperature limit below the maximum level. The knob
stop adjustment ring shown in Figure 19 is adjustable by
loosening the set screw, rotating the knobstop ring to the
desired location, and tightening the set screw.
16
HOT
Knobstop Set Screw
Knobstop Ring
Figure 19. Water Temperature Thermostat
NOTE: Maximum setpoint is 104°F (40°C).
COOL