Applicable Standards And Reference Documentation; Standards; Electromagnetic Compatibility - Seagate SAVVIO 10K.5 FC ST9300605FC Product Manual

3.0

Applicable standards and reference documentation

The drives documented in this manual have been developed as system peripherals to the highest standards of
design and construction. The drives depend on host equipment to provide adequate power and environment
for optimum performance and compliance with applicable industry and governmental regulations. Special
attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temper-
ature regulation. In particular, the drives must be securely mounted to guarantee the specified performance
characteristics. Mounting by bottom holes must meet the requirements of Section 9.4.
3.1

Standards

The Savvio family complies with Seagate standards as noted in the appropriate sections of this manual and the
Seagate FC Interface Manual, part number 100293070.
The drives are recognized in accordance with UL 60950 and CSA 60950 as tested by UL(CSA) and EN60950
as tested by TUV.
3.1.1

Electromagnetic compatibility

The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to
use. As such the drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC
Rules and Regulations nor the Radio Interference Regulations of the Canadian Department of Communica-
tions.
The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides
reasonable shielding. The drive is capable of meeting the Class B limits of the FCC Rules and Regulations of
the Canadian Department of Communications when properly packaged; however, it is the user's responsibility
to assure that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be
required if the enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure,
shielded cables should be used, with the shields grounded to the enclosure and to the host controller.
3.1.1.1 Electromagnetic susceptibility
As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is
the responsibility of those integrating the drive within their systems to perform those tests required and design
their system to ensure that equipment operating in the same system as the drive or external to the system
does not adversely affect the performance of the drive. See Tables 2 through 5, DC power requirements.
Savvio 10K.5 FC Product Manual, Rev. D 3