Interface Requirements; Fc-Al Features; Fibre Channel Link Service Frames - Seagate SAVVIO 10K.5 FC ST9300605FC Product Manual

10.0

Interface requirements

This section partially describes the interface requirements as implemented on Savvio 10K.5 FC drives. Addi-
tional information is provided in the Fibre Channel Interface Manual (part number 100293070).
10.1

FC-AL features

This section lists the Fibre Channel-specific features supported by Savvio 10K.5 FC drives.
10.1.1

Fibre Channel link service frames

Table 7 lists the link services supported by Savvio 10K.5 FC drives.
Table 7: Link services supported
Type of frame
Basic link service frames
Basic link service reply frames
Extended link service frames
Extended link service reply frames
Fibre Channel Services
50
Link service
Abort Sequence (ABTS)
Basic_Accept (BA_ACC)
Basic_Reject (BA_RJT)
N_Port Login (PLOGI)
Fabric Login (FLOGI)
Logout (LOGO)
Process Login (PRLI)
Process Logout (PRLO)
Read Link Status (RLS)
Fabric Address Notification (FAN)
Port Discovery (PDISC)
Address Discovery (ADISC)
Third-party Process Logout (TRPLO)
Accept (ACC)
Link Service Reject (LS_RJT)
Register FC-4 Types (RFT_ID)
Savvio 10K.5 FC Product Manual, Rev. D