Standard Features; Media Description - Seagate SAVVIO 10K.5 FC ST9300605FC Product Manual

4.1

Standard features

Savvio 10K.5 FC drives have the following standard features:
• Perpendicular recording technology
• 4-Gb Fibre Channel interface
• Integrated dual port FC-AL controller
• Concurrent dual port transfers
• Support for FC arbitrated loop, private and public attachment
• Differential copper FC drivers and receivers
• Downloadable firmware using the FC-AL interface
• Supports SCSI enclosure services via interface connector
• 128-deep task set (queue)
• Supports up to 32 initiators
• Drive selection ID and configuration options are set on the FC-AL backpanel or through interface com-
mands. Jumpers are not used on the drive.
• Supports SCSI Enclosure Services through the interface connector
• Fibre Channel worldwide name uniquely identifies the drive and each port
• User-selectable logical block size (512, 520, 524, or 528 bytes per logical block)
• Selectable frame sizes from 256 to 2,112 bytes
• Industry standard SFF 2.5" low profile form factor dimensions
• Programmable logical block reallocation scheme
• Flawed logical block reallocation at format time
• Programmable auto write and read reallocation
• Sealed head and disk assembly (HDA)
• No preventive maintenance or adjustments required
• Dedicated head load/upload zone and automatic shipping lock
• Embedded servo design
• Automatic shipping lock
• Self-diagnostics performed when power is applied to the drive
• Zone bit recording (ZBR)
• Vertical, horizontal, or top down mounting
• Dynamic spindle brake
• 64MB data buffer (see Section 5.5).
• Drive Self Test (DST)
• Background Media Scan (BMS)
• Idle Read After Write (IRAW)
• Power Choice
• Reallocation of defects on command (Post Format)
4.2

Media description

The media used on the drive has an glass substrate coated with a thin film magnetic material, overcoated with
a proprietary protective layer for improved durability and environmental protection.
Savvio 10K.5 FC Product Manual, Rev. D 7