Table of Contents
Advertisement
www.seagate.com
2.0
Applicable standards and reference documentation
The drives documented in this manual have been developed as system peripherals to the highest standards of design and
construction. The drives depend on host equipment to provide adequate power and environment for optimum performance and
compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power
distribution, shielding, audible noise control, and temperature regulation. In particular, the drives must be securely mounted to
guarantee the specified performance characteristics. Mounting by bottom holes must meet the requirements of
2.1
Agency and Safety Certifications
Each Hard Drive and Solid State Drive ("drives") has a product label that includes certifications that are applicable to that specific
drive. The following information provides an overview of requirements that may be applicable to the drive.
2.1.1
Safety certification
These products are certified to meet the requirements of UL/cUL 60950-1, EN 60950-1, and may also include, IEC 62368, UL 62368
and EN 62368.
The security features of Self-Encrypting Drive models are based on the "TCG Storage Architecture Core Specification" and the "TCG
Storage Workgroup Security Subsystem Class: Enterprise_A" specification with additional vendor-unique features as noted in this
product manual.
2.1.2
Regulatory Models
The following regulatory model number represent all features and configurations within the series:
Regulatory Model Numbers: STL009
2.1.3
Electromagnetic compatibility
The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The drive is
supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations.
The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides reasonable
shielding. The drive is capable of meeting the Class B limits of the FCC Rules and Regulations when properly packaged; however, it
is the user's responsibility to assure that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may
be required if the enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables
should be used, with the shields grounded to the enclosure and to the host controller.
2.1.3.1
Electromagnetic susceptibility
The drive as delivered is tested to meet susceptibility requirements in a representative enclosure. It is the responsibility of those
integrating the drive within their systems to perform those tests required and design their system to ensure that equipment
operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See
Section 6.4, "DC power requirements"
Seagate Exos X16 SAS Product Manual, Rev. A
.
Applicable standards and reference documentation
Section
8.3.
7
Advertisement
Table of Contents
