iDevices, LLC
To connect an additional iGrill
iPhone or iPod touch follow these steps:
While turned on, place your iGrill
•
next to your Apple device and open the iDevices Connected app.
Tap on the grey bar located at the top of the screen to expose the
•
device menu. Select the product you would like to pair with from the
device menu. Your Apple device will display a pairing request. Once
accepted, your Apple device will pair with the additional product and
you are ready to configure your settings and start grilling!
3.5 Mounting
The iGrill
•
portion of your grill, smoker or other magnetic surfaces.
The iGrill
•
into its base for two different viewing angles.
The iGrill
•
side. This allows the iGrill
surface. The magnetic disc has a protective cover on its face to protect it
from being scratched.
To mount your magnetic disc, please follow the below steps:
Clean the surface thoroughly where the magnetic disc will be adhered to
•
ensure proper bonding.
Remove the film covering the adhesive on the magnetic disc (not the
•
scratch protection film on the face of the disc).
Adhere the magnetic disc to your desired surface.
•
Let the magnetic disc bond to the surface for at least 24 hours before
•
mounting the iGrill
NOTE:
The base of the iGrill
•
must be placed on a cool surface. If the surface is too hot to touch, it's
too hot for the base!
7
7
(or other iDevices product) device to your iPad,
2
2
's base is magnetic for convenient positioning on a cool
can be taken out of its base, rotated 180° and placed back
2
comes with an optional magnetic disc with adhesive on one
2
2
to magnetically mount to a non-magnetic
to it.
2
is not designed to withstand high heat and it
2
iGrill
(or other iDevices product)
2
User Manual
2
v1.0