iDevices, LLC
4.
Using the iGrill
4.1 Display
The iGrill
's display contains the following:
2
Display
Displays temperature of currently active probe.
•
Displays "DC" for temperatures below set range or below -22°F (-30ºC).
•
Displays "DH" for temperatures above set range or above 572°F (300ºC).
•
Displays "OFF" during power off sequence.
•
Animates during power on sequence and during reset.
•
Bluetooth LED
Blinks blue when discoverable and awaiting pairing.
•
Illuminates solid blue when paired.
•
Probe Indicator LEDs
Far left side LED illuminates to indicate Probe 1 temperature being
•
displayed.
Middle left side LED illuminates to indicate Probe 2 temperature being
•
displayed.
Middle right side LED illuminates to indicate Probe 3 temperature being
•
displayed.
Far right side LED illuminates to indicate Probe 4 temperature being
•
displayed.
4.2 Probe Toggle Buttons
The iGrill
has two buttons adjacent to the power button to toggle between
2
probes when there is more than one probe connected.
Pressing the < or > button will switch from the currently displayed probe
•
temperature (as indicated by the illuminated probe indicator LED) to the
next probe temperature in that direction.
Holding either the < or > button down for 1 second will activate a cycle
•
that will continuously cycle through displaying each probe's
temperature.
Pressing the <, >, or power button while the alternating display cycle is
•
activated will disable the display cycle.
9
9
2
iGrill
User Manual
2
v1.0