Sharp FO-5700 Operation Manual page 60

All manuals and user guides at all-guides.com
all-FO5650.book Page 56 Friday, November 26, 1999 11:05 AM
Sending a Fax by Automatic Dialling
Automatic redialling
If you use automatic dialling (including Direct Keypad Dialling) and
the line is busy, the fax machine will automatically redial the number.
The fax machine was set at the factory to make 2 redialling attempts at
intervals of 5 minutes.
To stop automatic redialling, press the CHANGEOVER key to show
the telephone line status in the display (make sure that RECALL
MODE appears on the top line of the display and the number of the
receiving party appears on the bottom line to the right), and then press
the STOP key.
If desired, you can change the number of redial attempts with Option
Setting 6, and the interval at which redialling takes place with Option
Setting 7. See Chapter 5, Optional Settings.
Memory Retransmission
If a line error occurs during any type of memory transmission, your
fax will automatically redial the number and attempt to complete the
transmission. Retransmission will begin from the page which was
being transmitted when the error occurred.
The fax machine has been set at the factory to make 2 attempts at
retransmission, with each attempt made immediately after the
previous attempt. If desired, you can change the number of attempts
by changing Option Setting 17, and have the fax wait a selected
number of minutes between each attempt by changing Option Setting
18. See Chapter 6, Optional Settings.
♦ To stop retransmission, press the CHANGEOVER key to show the
telephone line status in the display (make sure that RETRY MODE
appears on the top line of the display and the number of the receiv-
ing party appears on the bottom line to the right), and then press the
STOP key.
♦ The numbering of pages retransmitted will begin from "1" again.
56