Sharp FO-5700 Operation Manual page 134

All manuals and user guides at all-guides.com
all-FO5650.book Page 130 Friday, November 26, 1999 11:05 AM
Entering and Using Programs
Cancelling a programmed timer operation
If a Program Key has been pressed for a timer operation and you need
to cancel the operation before it is performed, follow the steps below.
Note: This procedure will not work for a document stored for a batch
transmission. To cancel a batch transmission operation, see Canceling a
document stored for batch transmission in Batch Transmission in this
chapter.
1
Press the Program Key.
2
Press the START key.
130
2
B
(Example)
START