Controlling The Waste Disposer By A Wall Mounted Switch - Fisher & Paykel GD75IA1 Installation Instructions Manual

Controlling the waste disposer by a wall mounted switch

The waste disposer can be controlled by means of a wall mounted switch rather than the bench mounted air switch
supplied with the product.
To use an existing wall mounted switch:
1. Connect one end of the PVC tubing to the underside of the air switch button.
2. Connect the other end of the PVC tubing to the air switch outlet on the underside of the waste disposer (as
shown in fig.14).
3. Press the button on the air switch to activate the waste disposer.
4. Whilst the waste disposer is running, disconnect the PVC tubing from the air switch outlet on the underside of
the waste disposer.
5. Turn the waste disposer off using the wall mounted switch. The waste disposer can now be turned on and off
using the wall mounted switch.
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashing_Accessories/GD75IA1/User_Guide_GD75IA1/02_Installation_instructions
Updated: Fri, 01 Mar 2019 07:04:48 GMT
Powered by
9