What you will need
• Phillips screwdriver
• Flat blade screwdriver
• Steel Punch or wooden dowel Petroleum jelly or liquid soap
• Plumber's Putty
Top and bottom of sink and sink flange surfaces must be free of any materials to prevent
leaks.
Unpacking your waste disposer
1. Remove the waste disposer from the packaging.
2. Identify and check that all components are
included in the carton before beginning
the installation (fig. 1).
3. Take care not to misplace any of the components.
Components
1. Stopper
2. Sink flange
3. Rubber gasket
4. Flange ring
5. Protector ring
6. Mount ring
7. Screw clamp
8. Hopper with splash guard
9. Dishwasher discharge inlet
10. Drain housing
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashing_Accessories/GD75IA1/User_Guide_GD75IA1/02_Installation_instructions
Updated: Fri, 01 Mar 2019 07:04:48 GMT
Powered by
2