Installing The Air-Switch (Optional) - Fisher & Paykel GD75IA1 Installation Instructions Manual

Installing the air-switch (optional)

1. Select a location on the bench top for the air switch to be
positioned (recommended position is near the sink). Mark
and cut a hole, 33mm in diameter, in the bench top.
2. Remove the nut from the thread of the air switch (fig.12).
3. Feed one end of the PVC tubing up through the cutout,
from the underside of the bench top, and attach to the
underside of the push button.
4. Insert the push button into the bench top cut out (fig.12).
Feed the PVC tube through the nut. Screw the nut onto the
thread tightly (fig.13), securing the push button tightly onto
the bench top.
Do not use a wrench to tighten the
nut.
5. Connect the other end of the PVC tubing to the air switch
outlet, located on the underside of the waste disposer
(fig.14).
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashing_Accessories/GD75IA1/User_Guide_GD75IA1/02_Installation_instructions
Fig. 12 Fitting the air switch
Fig. 13 Securing to the bench top
Fig. 14 Connecting tube to air switch outlet
Updated: Fri, 01 Mar 2019 07:04:48 GMT
Powered by
8