Table of Contents
Advertisement
WebSTAR Cable Modem Back Panel
T9917
10
Back Panel Components
1 POWER
1
2 RESET
2
3
3 ETHERNET
4
4 USB
5 CABLE IN
5
Connects the cable modem to the DC output of the AC power
adapter that is provided with your cable modem
Note: Only use the power cord and the AC power adapter that are
provided with your cable modem.
Reset-to-Default button (Factory Reset)
CAUTION:
This button is for maintenance purposes only. Do not use!
RJ-45 Ethernet port connects to the Ethernet port on your PC
12 Mbps USB port connects to the USB port on your PC
F-Connector connects to an active cable signal from your cable
service provider
CAUTION:
Do not connect your PC to both the Ethernet and USB ports at
the same time.
Note: You can connect two separate PCs to the cable modem at
the same time by connecting one to the Ethernet port and one to
the USB port. See Modem Installation next in this guide.
Advertisement
Table of Contents
