Basic Operations - Kenwood DMX5019DAB Instruction Manual

Remote Controller Remote Controller
Remote controller mode switch
The functions operated from the remote controller
differ depending on the position of the mode switch.
• AUD mode: Switch to this mode when controlling a
selected source or tuner source, etc.
– When controlling a player that is not integrated in
the unit, select "AUD" mode.
• DVD mode: Not used.
• TV mode: Not used.
• NAV mode: Not used.
• The position of the remote control mode switch is
indicated in the title of each mode, e.g., "AUD mode".
40 ENGLISH
CAUTION
• Put the remote controller in a place where it will
not move during braking or other operations. A
dangerous situation could result if the remote
controller falls down and gets wedged under the
pedals while driving.
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not recharge, short, break up or heat the battery,
or place it in an open fire. Such actions may cause
the battery to leak fluid. If spilled fluid comes in
contact with your eyes or clothing, immediately rinse
with water and consult a physician.
• Place the battery out of reach of children. In the
unlikely event that a child swallows the battery,
immediately consult a physician.

Basic operations

Common operations (AUD mode)
SRC • Selects the source.
• Hangs up the incoming/current
call.
VOL J / K Adjusts the volume level.
ATT Attenuates/restores the sound.
VOICE/FNC/ For USB/iPod: Switches to the
MENU/PBC current source control screen.
ENTER Enters options.
Answers incoming calls.
ROUTE M/ Changes the aspect ratio.
MODE/ • The aspect ratio changes each
TOP MENU time you press this key.
VIEW/AV OUT Switches the AV source to be
output.
MAP DIR/OPEN Not used for this unit.
NAV/DISP Switches to the current source
control screen.
ZOOM OUT/IN Not used for this unit.
2 ZONE Not used for this unit.
Not used for this unit.
R.VOL