Kenwood DMX5019DAB Instruction Manual page 40

Settings Settings
2
Select a function to assign to the selected
button.
3
Repeat steps 1 and 2 to register other
functions to other buttons.
4
Touch [Learning completed] to finish
procedure.
A confirmation message appears. Touch [Yes].
• The unit can register/change all of the buttons'
functions at the same time. To do this, press all
buttons in turn and after pressing all of them, touch
[Learning completed] in step 2.
• When changing the functions already learned, touch
the assigned function you want to change in step 2
and then touch to select the new function from the
function list.
• Confirm the contents of the settable functions in the
function list. You cannot edit the function list.
To initialize the setting: Touch [Learning
initialisation] in step 2.
• A confirmation message appears. Touch [Yes].
– To cancel the initialization, touch [No].
36 ENGLISH
<Beep>*
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
* Available only when <X'over Network> is set to [2way].
(Page 30)
<Language Select>
Select the text language used for on-screen
information. For details, see "Initial settings" on
page 4.
<Touch Panel Adjust>
Adjust the touch positions of the keys on the screen.
Touch and hold the center of the marks at the lower
left (1), then the upper right (2) as instructed.
(Hold)
• To reset the touch position, touch [Reset].
• To cancel the current operation, touch [Cancel].
<Clock>
Select the method to set the date and clock. For
details, see "Calendar/clock settings" on page 5.
<Time Zone>*
Select the time zone for your area. For details, see
"Calendar/clock settings" on page 5.
* Selectable when [Clock] is set to [Manual]. (Page 5)
<Clock Adjust>*
Adjust the date and clock manually. For details, see
"Calendar/clock settings" on page 5.
* Selectable when [Clock] is set to [Manual]. (Page 5)
(Hold)