Table of Contents
Advertisement
Installation and Connection
Installation and Connection
Removing the unit
1
Engage the catch pins on the extraction
keys (
"
) and remove the two locks on the
lower part of the trim plate (
π
"
2
Remove from the upper two catches of
the trim plate (
π
).
The frame can be removed from the top side in the
same manner.
44
ENGLISH
3
Remove the unit by inserting the two
extraction keys (
illustrated.
π
).
Catch
Lock
Be careful to avoid injury from the catch pins on
the extraction key.
"
), then pulling them as
Connecting external components
1 Steering wheel remote controller input (REMO-IN)
• Connect to the car's steering remote harness
using the steering wheel remote input cable
(optional accessary). Contact your KENWOOD
dealer for details.
2 Audio video input (AV-IN)
3 Video output (V-OUT)
4 Rear view camera input (R-CAM)
5 Output terminals*
• Left output (White)
• Right output (Red)
REAR: Rear speaker preouts
FRONT: Front speaker preouts
SW: Subwoofer preouts
For 3-way crossover:
REAR: Tweeter preouts
FRONT: Mid range speaker preouts
SW: Woofer preouts
* When connecting an external amplifier, connect its ground wire
to the chassis of the car; otherwise the unit may be damaged.
Advertisement
Table of Contents
