Starting The Engine; Using The Self-Propel Drive - Toro 20339 Operator's Manual

Starting the Engine

1. Hold the blade-control bar against the handle
(A of Figure 13).
2. Pull the recoil-start handle (B of
Note:
When you pull the recoil-start handle,
pull it lightly until you feel resistance, then pull it
sharply. Allow the rope to return to the handle
slowly.
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.
Figure 13

Using the Self-Propel Drive

For Self-Propel-Drive Models Only
•
To engage the self-propel drive, pull the
self-propel-drive bar to the handle and hold it
(Figure 14).
Figure 14
1. Self-propel-drive bar
Note:
The maximum self-propel-drive speed is
fixed. To reduce the speed, increase the space
between the self-propel-drive bar and the handle.
•
To disengage the self-propel-drive, release the
self-propel drive bar.
Note:
To reduce the ground speed, increase the
space between the self-propel drive bar and the
handle.
Figure 13).
g230255
g240765
13